AVL F-FEM-CON User Manual

13
What you should know
F-FEM-CON — User’s Guide
Contents & Scope This manual documents the I/O component when using the F-FEM-CON in a
test bed system and describes the hardware used:
 Connector pin out
 Power supply
 Grounding and shielding
 Sensor types
Secondary litera-
ture
 F-FEM Parameterization
 EMCON 400 Standalone Users Guide
 CDC-BME-EMCON-UUC 400 System Guide
1.5.1 Typographic Conventions
Safety messages:
Additional safety symbols:
Notes:
NOTICE
This documentation is also valid for the F-FEM-CON Advanced. If necessary
there are notes to show differences.
The installation (putting into operation) may only be executed by commissioning
engineers or authorized AVL personnel.
WARNING
Indicates a hazardous situation which – if not avoided – could result in death or
serious injury.
CAUTION
Indicates a hazardous situation which – if not avoided – could result in minor or
moderate injury.
Voltage hazard warning
NOTICE
This text indicates situations or operation errors which could result in property
damage or data loss.
Information
This text indicates important information or operating instructions. Not observing
these instructions could inhibit or impede you from successfully completing the
tasks described in this documentation.

AVL F-FEM-CON Specifications

General

Brand	AVL
Model	F-FEM-CON
Category	Measuring Instruments
Language	English