Consultation / Hold
FRITZ!Box Fon WLAN 7170 – 11 Configuration and Operation by Telephone 103
If you return to Caller 1 by pressing the Hold button, the con-
nection to Caller 2 is not cleared down until Caller 2 hangs
up. Connection charges continue to accrue.
Call 2
P
If the call is answered, you can consult on this
line. The original caller is still on hold.
R If Caller 2's line is busy or the call is not an-
swered, press the Hold button again to return to
Caller 1.
R1 To switch back to Caller 1 after talking to Caller 2,
dial the sequence shown at left. This concludes
the consultation.
Call 1
P
You can also return to Caller 1 by hanging up the
handset: this ends the connection to Caller 2. In
this case, your phone rings as soon as you hang
up. Pick up the handset to return to Caller 1 again.
O Hang up the handset to end the connection.
To Next Page
Loading...
