Call Waiting
FRITZ!Box Fon WLAN 7170 – 11 Configuration and Operation by Telephone 121
Call Waiting
Enable the “Call Waiting” feature to be notified during a call
if a second caller is dialing your line. An acoustic signal in
your telephone handset notifies you that a second call is
waiting. You can accept the connection with the new caller
within 30 seconds. If you ignore the signal, the waiting call is
rejected after 30 seconds.
For instructions on how to turn the “Call Waiting” function on
and off, see the section “Call Waiting Option” on page 105.
R2
To accept a waiting call, dial the sequence shown at
left. Your original call is now on hold.
R1
To return to your original connection, dial the se-
quence shown at left. You can also accept the waiting
call by hanging up your existing connection, i.e., by
hanging up the handset. In this case the phone rings
as soon as you have hung up. Pick up the handset
again to accept the waiting call.
R0
To reject a waiting call, dial the sequence shown at
left.
To Next Page
Loading...
Need help?
General
