AVM FRITZ!Box Fon WLAN - Page 120

Connected Line Identification Restriction and Presentation (COLR / COLP)
120 FRITZ!Box Fon WLAN 7170 – 11 Configuration and Operation by Telephone
Enabling Connected Line Identification Restriction
Permanently
To permanently disable transmission of the connected line’s
number (COLR), proceed as follows:
Enabling Connected Line Identification Presentation
Permanently
To permanently enable transmission of the connected line’s
number (COLP), proceed as follows:
N
Pick up the handset.
r53 Ext. s1s
Dial the sequence shown at left to
disable transmission of the connect-
ed line’s number. Type in the num-
ber of the extension in the “Ext.”
field.
r91ss
Save your settings if desired by dial-
ing the sequence shown at left.
O
Hang up the handset.
N
Pick up the handset.
r53 Ext. s0s Dial the sequence shown at left to
enable transmission of the connect-
ed line’s number. Type in the num-
ber of the extension in the “Ext.”
field.
r91ss
Save your settings if desired by dial-
ing the sequence shown at left.
O
Hang up the handset.