AVM FRITZ!Box Fon WLAN User Manual

Connected Line Identification Restriction and Presentation (COLR / COLP)
FRITZ!Box Fon WLAN 7170 – 11 Configuration and Operation by Telephone 119
Enabling CLIP
Disabling CLIP
Connected Line Identification Restriction and
Presentation (COLR / COLP)
By default, a caller’s display always shows the Multiple Sub-
scriber Number (MSN) of the extension she or he dialed. If
you accept the call at another extension, the MSN of this ex-
tension will be displayed, as long as the caller is using an
ISDN phone with the COLP feature enabled. If you do not
want the caller to know that the call has been picked up at
another extension (see page 101) and thus do not wish this
number to be displayed, you have the option of suppressing
transmission of the connected line. The caller’s display will
continue to show the number she or he called.
Transmission of the connected line's number can be
switched on and off for each extension individually. Trans-
mission of the connected line’s number is permanently en-
abled in the PBX factory settings.
N
Pick up the handset.
r50 Ext. s1s Dial the sequence shown at left.
Type in the number of the extension
in the “Ext.” field.
r91ss
Save your settings if desired by dial-
ing the sequence shown at left.
O
Hang up the handset.
N
Pick up the handset.
r50Ext. s0s Dial the sequence shown at left.
Type in the number of the extension
in the “Ext.” field.
r91ss
Save your settings if desired by dial-
ing the sequence shown at left.
O
Hang up the handset.

AVM FRITZ!Box Fon WLAN Specifications

General

Brand	AVM
Model	FRITZ!Box Fon WLAN
Category	Wireless Router
Language	English