Chapter 4: Using CPS Appliance Commands 39
Port Alert Copy
Copies a port’s alert strings to another port.
Access right: SCON or PCON
Access level: ADMIN or APPLIANCEADMIN
Port Alert Delete
Deletes one or more port alert strings.
Access right: SCON or PCON
Access level: ADMIN or APPLIANCEADMIN
Port Break
Sends a break signal to the attached device.
Access right: BREAK
Access level: ADMIN or APPLIANCEADMIN
Port History
Accesses the port history buffer.
Access right: none needed
Access level: all
Port Logout
Terminates the CPS session on a specified port.
Access right: USER
Access level: ADMIN or APPLIANCEADMIN
Port Set
Changes port settings.
Access right: SCON or PCON
Access level: ADMIN or APPLIANCEADMIN
Quit
Terminates the current CPS session.
Access right: none needed
Access level: all
Resume
Resumes device connection after being in CLI mode.
Access right: none needed
Access level: all
Server CLI
Specifies the serial CLI port, port type and access character; enables/disables
device connection from the CLI port and authentication of CLI port sessions;
specifies a modem initialization string; specifies port history mode operations and a
port time-out value.
Access right: SCON
Access level: APPLIANCEADMIN
Server FLASH
Updates the unit’s FLASH.
Access right: SCON
Access level: APPLIANCEADMIN
Server Ping
Enables/disables response to ping requests.
Access right: SCON
Access level: APPLIANCEADMIN
Server PPP
Enables/disables a PPP server on the serial CLI port.
Access right: SCON
Access level: APPLIANCEADMIN
Table 4.4: CPS Appliance Command Summary (Continued)
Command Description, Access Right and Access Level
To Next Page
Loading...
