17
Item Description
Audio Detection Enable (ON) or disable (OFF) audio detection.
This function allows the camera to be sensitive to any sound made around the surveillance area if your area is
supposed to be a quiet place and no one is allowed to access.
When this function is enabled, click the title “Audio Detection” underlined to configure its sensitivity from 0 ~ 50.
Trigger Duration Set the duration time for trigger recording (5 / 10 / 20 / 40 seconds).
Action
Here defines how the camera delivers alerts to you for any event.
Item Description
E-Mail Select the event type you want to receive E-mail notifications when it occurs.
Then, click the title “E-Mail” underlined to configure the record time from 1 ~ 5 seconds.
The camera will send the captured video clip to the E-mail address(s) assigned in “Network” “Mail” once the
selected event type occurs.
FTP Select the event type you want to receive FTP notifications when it occurs.
Then, click the title “FTP” underlined to configure the record time from 1 ~ 5 seconds.
The camera will upload the captured video clip to the FTP site assigned in “Network” “Mail” once the selected
event type occurs.
Alarm Out
Select the event type you want to trigger the alarm-out device to work when it occurs.
Then, click the title “Alarm Out” underlined to configure the trigger rule.
LED Alert Select the event type you want to enable the LED light when it occurs.
Then, click the title “LED Alert” underlined to configure its activation time from 1 ~ 3600 seconds.
Record Select the event type you want to enable event recording when it occurs.
Audio Alert Select the event type you want to enable audio alert when it occurs.
3.6.2 Push Video
“Push Video” is an active notification system, different from traditional FTP and Email notification methods.
It functions as a key to your surveillance area. When it’s enabled, your surveillance area is considered to be
locked on, and some functions or parameters will be fixed by default to ensure “Push Video” gets the optimized
event images.
Note: Before using this function, make sure you’ve inserted a micro SD card to this camera for event
recording. For details, please refer to “APPENDIX 3 MICRO SD CARD COMPATIBLE LIST” at page
24.
Item Description
Guard Select to enable or disable Push Video. This function can also be enabled from your iPhone or Android mobile devices.
When this function is enabled, the image resolution is fixed to “VGA”.
LED Lock Select to fix the LED light mode to auto (Enable) or remain the current LED light mode (Disable) when Push Video is
enabled.
When this function is enabled, it could ensure Push Video recording to get enough light when the environment is dark.
This function is set to “Enable” by default.
Slow Shutter Lock Select to fix the slow shutter level to level 2 (Enable) or remain the current slow shutter level (Disable) when Push Video
is enabled.
When this function is enabled, it could ensure Push Video recording to get clear images when the environment is dark.
This function is set to “Enable” by default.
Guard Rule Select the rule to enable Push Video from “External Alarm”, “Internal Alarm”, or “Internal Alarm OR External Alarm”.
External Alarm – The alarm device additionally connected to your camera
Internal Alarm – The human detection function built in this camera
This function is set to “Internal Alarm OR External Alarm” by default.
Record Frame Rate Select the frame rate for Push Video recording.
To Next Page
Loading...
Need help?
General
