MAIN MENU
23
5.5.3 ALERT
ADVANCE CONFIG
CANERA EXT. ALERT ON
DETECTION INT. BUZZER OFF
ALERT KEY BUZZER ON
NETWORK VLOSS BUZZER ON
SNTP MOTION BUZZER ON
DISPLAY ALARM BUZZER ON
RECORD HDD BUZZER ON
REMOTE ALARM DURATION (SEC) 5
DCCS HDD NEARLY FULL (GB) 5
IVS
NOTIFY
EXIT
1) EXT. ALERT
Select to enable or disable the sound when any external alarm is triggered (ON / OFF).
2) INT. BUZZER
Select to enable or disable the sound (ON / OFF) for all internal buzzers: KEY BUZZER, VLOSS BUZZER,
MOTION BUZZER, ALARM BUZZER, and HDD BUZZER.
Note: When this item is set to “OFF”, item 3) to item 7) will be disabled even though they are set to ON.
3) KEY BUZZER
Select to enable or disable the sound when pressing the buttons on the front panel (ON / OFF).
4) VLOSS BUZZER
Select to enable or disable the sound when video loss happened (ON / OFF).
5) MOTION BUZZER
Select to enable or disable the sound when any motion alarm is triggered (ON / OFF).
6) ALARM BUZZER
Select to enable or disable the sound when any internal alarm is triggered (ON / OFF).
7) HDD BUZZER
Select to enable or disable the sound (ON / OFF) when the HDD remaining capacity reaches to the value set
in “HDD NEARLY FULL (GB)”.
8) ALARM DURATION (SEC)
Select the duration time for alarm buzzer in second (5 / 10 / 20 / 40).
9) HDD NEARLY FULL (GB)
If HDD BUZZER is enabled, select the duration time for buzzer notifications when the hard disk available
capacity is 5/10/15/20 GB left.
5.5.4 NETWORK
The description below is only for STATIC network type. For PPPOE and DHCP settings, you need to set from
“Video Viewer”.
For details, please download the extended user manual for “Video Viewer” from
http://www.surveillance-download.com/user/CMS.pdf.
To Next Page
Loading...
Need help?
General
