MAIN MENU
25
5.5.6 DISPLAY
ADVANCE CONFIG
CAMERA DE-INTERLACE (For Selected Models Only) OFF
DETECTION FULL SCREEN DURATION 03
ALERT QUAD SCREEN DURATION (For Selected Models Only) 03
NETWORK DWELL SCREEN DURATION 03
SNTP DISPLAY COVERT ON
DISPLAY HDD DISPLAY MODE HDD SIZE
RECORD DISPLAY OUTPUT PATH AUTO
REMOTE ALPHA BLENDING 200
DCCS
IVS
NOTIFY
EXIT
1) DE-INTERLACE
Select to enable or disable the de-interlace function (ON / OFF).
Note: If you set the recording image size as “FRAME”, please TURN ON de-interlace function.
If you set the recording image size as “CIF”, please TURN OFF the de-interlace function.
2) FULL SCREEN DURATION
Select the full screen dwell duration time in second (03 / 05 / 10 / 15).
3) QUAD SCREEN DURATION (For Selected Models Only)
Select the quad screen dwell duration time in second (03 / 05 / 10 / 15).
4) DWELL SCREEN DURATION
Select the duration time in second for the CALL monitor function (03 / 05 / 10 / 15).
5) DISPLAY COVERT
Select “ON” or “OFF” to display or hide the wording “COV.” When covert recording is activated in
“CAMERA”.
6) HDD DISPLAY MODE
Select “SIZE” to show the remaining HDD capacity for recording in GB, or “TIME” to show the remaining
recording time.
7) DISPLAY OUTPUT PATH
The default video output setting is “AUTO”, meaning the DVR will automatically detect the video output
source. When a CRT monitor and LCD monitor are both connected, the default video output is via the
connected LCD monitor.
Select “VGA” to fix the video output via the connected LCD monitor, or “COMPOSITE” to fix the video output
via the connected CRT monitor.
When the change is made, the DVR will then reboot for the change to take effect.
8) ALPHA BLENDING
Click to manually adjust the transparent level of the main menu.
To Next Page
Loading...
Need help?
General
