MAIN MENU
24
STATIC
ADVANCE CONFIG
CANERA NETWORK TYPE STATIC
DETECTION IP 192.168.001.010
ALERT GATEWAY 192.168.001.254
NETWORK NETMASK 255.255.255.000
SNTP PRIMARY DNS 168.095.001.001
DISPLAY SECONDARY DNS 139.175.055.244
RECORD PORT 0080
REMOTE SAVE NETWORK SETTING APPLY
DCCS
IVS
NOTIFY
EXIT
1) NETWORK TYPE
Select the network type as STATIC and set all the information needed in the DVR.
2) NETWORK INFORMATION (IP / GATEWAY / NETMASK)
Key in all the network information obtained from your ISP (Internet Service Provider).
3) DNS (PRIMARY DNS / SECONDARY DNS)
Key in the IP address of the domain name server obtained from your ISP (Internet Service Provider).
4) PORT
The valid number ranges from 1 to 9999. The default value is 80. Typically, the TCP port used by HTTP is 80.
However in some cases, it is better to change this port number for added flexibility or security.
5) SAVE NETWORK SETTING
Click “APPLY” to confirm the settings.
5.5.5 SNTP
Before using this function, please connect your DVR to Internet.
ADVANCE CONFIG
CANERA GMT (GMT + 8:00) TAIPEI
DETECTION NTP SERVER tock.stdtime.gov.tw
ALERT SYNC PERIOD OFF
NETWORK
SNTP
DISPLAY
RECORD
REMOTE
DCCS
IVS
NOTIFY
EXIT
1) GMT
Select your time zone. There are 75 time zones for you to choose.
2) NTP SERVER
Click to change the default NTP server to another server they’re familiar with, or keep the default NTP
server.
3) SYNC PERIOD
Select to synchronize the DVR time everyday (DAILY), or turn this function off (OFF).
To Next Page
Loading...
Need help?
General
