Need help?Do you have a question about the Avtron ADDvantage-32 and is the answer not in the manual?
General| Manufacturer | Avtron |
|---|---|
| Type | Control Unit |
| Model | ADDvantage-32 |
| Number of Channels | 32 |
| Humidity | 5% to 95% non-condensing |
| Communication Interface | RS-485 |
Provides an overview of the ADDvantage-32 Advanced Control Module (ACM) and its capabilities.
Details the hardware components and features of the ADDvantage-32 unit.
Describes the microprocessor board, its functions, and components.
Details the system PC board, its role in interconnections, and available types.
Outlines the software features, including programming and block arrangement.
Lists the technical specifications for the ADDvantage-32 unit.
Explains how to access information using the alphanumeric keypad and LCD display.
Describes the menu format used for accessing parameters and information.
Defines parameters and their grouping within the application software.
Provides steps for editing numeric parameters using the keypad and display.
Details the function of dedicated inputs on the power supply board.
Describes the function of dedicated outputs, including Form C contact outputs.
Explains the digital inputs and how they are represented in the data table.
Covers parameters for hardware configuration and diagnostics.
Implements a 2-input digital AND gate with specified inputs and outputs.
Selects one of four possible analog signal paths based on control bits.
Provides features for selecting automatic taper back of drive current limits.
Sets output bits when input goes out of limits, used for overspeed detection.
Describes how data is stored in recorder channels and parameter settings.
Explains how to set triggers for recording data based on edges or bits.
Details how the sample rate determines time between recordings.
Explains that the channel must be armed to start recording data.
Instructions for inspecting shipping containers for damage.
Provides information on mechanical installation and relevant specifications.
Guidelines for making electrical connections and wiring practices.
Outlines the routine maintenance requirements for the ADDvantage-32.
Describes the fault and diagnostic features of the ADD-32 system.
Introduces the ADDvantage-32's support for 802.3 Ethernet communication.
Lists the hardware and software requirements for Ethernet support.
Explains how to configure the drive's IP address for Ethernet communication.
Explains how data is accessed using tables (files) in the ADDvantage-32.
Details the structure of data tables, including file numbers and element referencing.
Provides descriptions for the files listed in Table 9-1.
To Next Page