FIRST CONSOLE IP ADDRES ASSIGNMENT|TALKBOX CONNECTIONS
OXYGEN 1000 & OXYGEN 2000 · User Manual · ENG
In SETUP > GENERAL > COMMUNICATIONS > TCP-IP
If DHCP = YES, the console IP ADDRESS-1 will be automatically assigned by your router.
If DHCP = NO
Type the desired IP ADDRESS in the ADDRESS 1 field. This parameter is useful to remotely control
your device.
We suggest you to do not change the ADDRESS 2 field, useful for Axel Support purposes.
Specify your gateway in GATEWAY field. Without this specification, your device is not able to find out
any update if available.
You can specify a desired DNS (admitted also the primary 8.8.8.8 or the secondary 8.8.4.4 google
DNS) into DNS field.
Your MAC-ADDRESS is automatically assigned to the console during its production.
After all the settings, we suggest you to close your OXYGEN REMOTER and to restart the console by
backpower button.
Open again OXYGEN REMOTER and you can connect to the new console IP ADDRESS from the
following mask:
To Next Page
Loading...