Axis 200 - Page 27

AXIS 200 User’s Manual Section 4: Configuring the AXIS 200
25
On the AXIS 200 Home Page, click on the Settings link to reach the
Configuration pages.
The configuration parameters are grouped into these pages:
•Image
•Date & Time
• Security
•TCP/IP
•Modem
Note:
❏ When entering the configuration pages for the first time during a
session, you will be prompted for username and password. Log on
as user
root
and use the default password
pass
. You are
recommended to change the root password
,
since all Axis
products are shipped with the same password as default.
Image Page
To specify the default image settings, click Image at the top of the
Configuration page.
The following is a description of the Image parameters
:
Parameter name Description
Rotation Snapshots may be presented with a varied degree of
rotation. The following settings are available: normal,
upsidedown, 90 deg or 270 deg.
Mirror Enables horizontal mirror images for your snapshots.
Color The AXIS 200 currently provides three different color
settings: none, less, or normal. When set to none, a black
and white snapshot file is produced. The two other settings
produce progressively colorful snapshots results.
Compression Three different compression settings for your snapshots:
high, medium or low. These settings determine the
compression factor for the resulting JPEG image. Low
compression produces an optimum picture quality, but
creates larger snapshot file sizes.
White balance The white balance is the reference color to which all other
colors in an image are compared. These modes are
available: Automatic, Fixoutdoor, Fixindoor and Freeze.
See further description on page 30.
Brightness Standard brightness parameter with a range setting of 0-9
and default value 5.