Axis 200 - Page 28

Section 4: Configuring the AXIS 200 AXIS 200 User’s Manual
26
Note:
❏ If you use CGI parameters within a URL request, these
parameters will override any settings defined within the
Configuration - Image page. You will find further information on
the CGI parameters on page 47.
Contrast Standard contrast setting that defines the color contrast for
AXIS 200 snapshots. This parameter has a range setting
of 0-9 and a default value 5.
Dark Detect Generally, black and white image production provides
better clarity during low light conditions. With the Dark
Detect parameter set to on, the AXIS 200 will only
generate black and white images once the level of light has
reached a predetermined minimum threshold.
Image Cache time A single snapshot image will be transmitted for multiple
accesses of the AXIS 200 within the defined Image Cache
time. This parameter may be varied between 0 - 999
seconds. The default value of zero causes the AXIS 200 to
generate a new snapshot for each access.
Front panel LED Enables the Snapshot indicator on the front panel of the
AXIS 200.
Image Text
Position x
position y
Text to be displayed on the image at the position specified
by the x and y coordinates.