Axis 200 - Page 30

Section 4: Configuring the AXIS 200 AXIS 200 User’s Manual
28
Security Page
You may change the configuration password for your AXIS 200 via
the Configuration - Security page. Click Security at the top of the
Configuration pages.
The following is a description of the Security parameters:
TCP/IP Page
You can set the IP parameters via the Configuration - TCP/IP page.
Click TCP/IP at the top of the Configuration pages.
Parameter name Description
Root password The password of the Administrator. When configuring the
unit for the first time, log on as user
root
and use the
default password
pass
. It is recommended that you
change the root password later, since all Axis products
are shipped with this password as default.
Usernames and
passwords
The AXIS 200 is default to anonymous user access,
which means that anybody on the Internet/intranet may
access the pictures taken by the camera from a Web
browser. Should you wish to restrict access to specific
users, enter the user names and passwords of only those
authorized users. If you are happy to provide an
anonymous user service, simply do not add any users.
Only characters a-z, A-Z or 0-9 are valid.
Parameter name Description
IP Address Defines the Internet address of the AXIS 200.
Node address Defines the Ethernet address of the AXIS 200.
Default Router Defines the default router for the AXIS 200. By default the
parameter is set to automatic router search.
Net Mask Defines the net mask for the AXIS 200. Used to determine
when the traffic should be sent via a router. The default
0.0.0.0 indicates that automatic router sensing is used.
Primary DNS The Internet address of the primary DNS server. Used for
identifying computers with names instead of IP addresses.
Secondary DNS The Internet address of the secondary DNS server, should
the primary DNS server be unavailable or disconnected.
SMTP Mail Server Name of the server that provides your e-mail facilities.
SMTP Return Address The reply address for e-mails sent by the AXIS 200.
Enable BOOTP Enables the BOOTP protocol for downloading the Internet
address.
Enable RARP Enables the RARP protocol for downloading the Internet
address.