Axis 200 - Page 45

AXIS 200 User’s Manual Section 5: Using the AXIS 200
43
Example 2
Activate on Input port 1 low and Input port 2 transition from low
to high.
Triggering Fields
Summary
This table summarizes the valid values of the triggering event fields:
Commands
Several CRON script commands can be used within an entry. All
commands must be terminated with a semi-colon “;”.
This table lists the available commands:
Syntax
The syntax of the commands is defined below:
0I1&/I2
Time and Date Fields
Input and Boot
Field
(Optional)
Field #
1 2 3 4 5 6
Description
Minute Hour Day Month Day of the Week Conditional Tag
Valid values
*
0-59
*
0-23
*
1-31
*
1-12
*
0-6
0 = Sunday
boot
B
I1, I2
Command Description
alert Sends a message to a remote host.
ftp Transfers an image to a remote host using FTP.
mail Sends an e-mail using the Simple Mail Transfer Protocol (SMTP).
offline Terminates the current PPP connection.
online Dials up a modem for PPP connection.
reset Resets the software or hardware of the unit.
sleep Makes a pause in the CRON script execution.
snapshot Updates the last snapshot image.
alert [-host HOST] [-port PORTNUMBER]
[-message STRING];