Appendix F: The RS232 Serial Port
AXIS 200 User’s Manual
84
The help menu is displayed
:
Note:
❏ All commands are case insensitive.
Access rights
The commands available to each user from within the welcome menu
will depend upon their user privileges.
Abbreviations
All non-destructive commands can be abbreviated to shortest
unambiguous form. However, because of their severity, the
HardReset
and
SoftReset
commands must be entered in their
entirety.
Super-user
The ‘
Su[username
]’ command is used to become another user, e.g.
‘
Su root
’ will, if you supply the correct password when prompted for
it, give you root access and enable use of the
Reset
and
SetDate
commands.
Zmodem
Once connection to the AXIS 200 has been established, you can
initiate a file transfer. Simply type the ‘
sz
’ command followed by the
filename of file you wish to transfer, as follows:
Help Display help text
Date Get current date and time
SetDate Set current date and time
Version Print current software
version
Su Become super-user or another
user
SoftReset Protocol reinit of Axis 200
HardReset Complete reboot of Axis 200
Sz Send a file using zmodem
protocol
Exit Disconnect
Quit Disconnect
Goodbye Disconnect
sz fullsize.jpg
To Next Page
Loading...
