Axis 200 - Page 95

AXIS 200 User’s Manual Appendix H: CRON Script Command Reference
93
Additional Options
In addition to the options described above, the following optional
settings are also available:
-ctrlport
Specifies the TCP port number in the range [0..65534] to be
used as the control port for the FTP server.
-dataport
Specifies the TCP port number in the range [0..65534] to be
used as data port for the FTP server.
-to
Specifies the timeout, i.e. the FTP session will terminate when
the specified time limit has expired. Format:
h<hours>m<minutes>s<seconds>
.
However, these options can only be used via a text editor.