Axis 200 - Page 94

Appendix H: CRON Script Command Reference AXIS 200 User’s Manual
92
The following table lists the available time stamp variables.
Every substitution must be proceeded by a dollar sign ‘
$
’.
$s
The current second in the range 00-59.
$m
The current minute in the range 00-59.
$h
The current hour in the range 00-23.
$d
The current day of the month in the range 01-31.
$n
The current month in the range 01-12.
$y
The current year without the century in the range 00-99.
$Y
The current year including the century.
$rS-E
Inserts an index number starting from number
S
through all the numbers including the number
E
. If you
leave out number
E
, it will be interpreted as a very large
number.
-temp
Specifies a temporary name for the file destination. This is to
prevent someone else from accidentally reading the file during
the download.
-loop
Specifies the time interval within which the command
should be repeated. Format:
h<hours>m<minutes>s<seconds>
.
-time
Specifies the total time the command should execute. Used
together with the loop attribute. Format:
h<hours>m<minutes>s<seconds>
.