USER MANUAL 3
1. Security rules
To avoid electrical shock or damage of the moisture
analyzer or connected peripheral devices, it is necessary to
follow the security rules below.
To feed the analyser use only mains socket with ground contact.
Fuse is situated under the analyzer cover.
During heating, the halogen heaters warm up to very high temperature. Avoid touching
the heaters as it may cause severe burns!
Dryer chamber cover heats up to 60°C, but perforated cover at the top may heat up over
100°C. Do not touch the cover top during drying as it may cause severe burns.
All repairs and necessary regulations can be made by authorised personnel only.
Do not use the analyser when its cover is opened.
Do not use the analyser in explosive conditions.
Do not use the analyser in high humidity.
If the device seems not to operate properly, plug it out of the mains and do not use it until
checked by authorised service.
Please return wasted device to the point of purchase or other company specialised in
recycling of wasted electronic components.
According to legal regulations it is forbidden to dispose
wasted electronic equipment in waste containers.
2. Set
The full set consists of:
1. Moisture analyzer,
2. Pan shield, pan support, pan handle,
3. Single-use pans – 10 pcs.,
4. Power supply cord,
5. User manual and guarantee card
Option on demand:
1. PT-105 thermometer with GT-105sk-8 probe
2. Distance sleeves 20mm – 2 pieces + additional sleeve 15mm for AGS moisture
analyzers
To Next Page
Loading...
Need help?
General
