34 USER MANUAL
18. Moisture analyser as a balance
The moisture analyser may be also used as a normal balance. To switch between
analyser / weighing mode press
key.
During moisture analyzer work as a normal balance essential influence on measurement
result has the proper setting of moisture analyzer level (level indicator is at the back of
the device) and precise balance calibration. Setting balance level is important after each
putting moisture analyzer into new place .
During normal weighing Menu key opens directly Configuration window, where the Units
option is available, Auto-zeroing, scale calibration and default settings.
18.1 Units
In order to change the unit used in balance and moisture analyzer use MENU key, in
Configuration window (User Menu window shows up when the normal weighing mode is
off).
Choice of unit is made using navigation keys and ENTER key.
USER MENU
1. Drying settings
2. Memory settings
3. Drying options
4. Drying report
5. Configuration
6. Settings default
7. Exit
CONFIGURATION
1. Units
2. Auto-zeroing
3. Interface
4. LCD settings
5. Language
6. Time&date
7. Keyboard
8. Defaults
9. Calibration
10. Info
Exit
CONFIGURATION
Carat [ct]
Miligram [mg]
Gram [g]
Kilogram [kg]
Pound [lb]
Ounce [oz]
Ounce troy [ozt]
Grain [gr]
Pennyweight [dwt]
Newton [N]
Exit
To Next Page
Loading...
Need help?
General
