16
1. There are 6 alarm inputs including alarm inputs 1 ~ 4, reversal input, brake input,
which can trigger the alarm recording. . Cursor will be displayed when the alarm
input channel is working. The first 4 ones can be self-defined by user.
2. Alarm output 1 and Alarm output 2 are 12V output by default, which can be used
as a trigger and need to be set up to combine with alarm input . You can also
setup BUZZER for the output.
3. If Alarm input 1 is active and combined with Alarm output 1, the Alarm output 1
will output a high-level voltage to trigger other device.
10 PIN 1 2 3 4 5 6 7 8 9 10
out2
out1
6
5
4
3
2
1
GND GND
To Next Page
Loading...
