Axis DV426 User Manual

35
8. Record Setup
8.1 Power On Rec
The DVR will start recording after power on when 'Power On Rec’
is set to ON. Default is ON.
8.2 Cyclic Rec
New video files will overwrite the previous ones when disk is full if
setting the Cyclic Rec ON. Otherwise, it will stop recording when disk is full.
Overwriting will cover all recording files including Event recording files by default.
8.3 Event Rec

Axis DV426 Specifications

General

Brand	Axis
Model	DV426
Category	Measuring Instruments
Language	English