71
: Press it, then the priority value of the selected alarm will be added by 1. The
bigger the value is, the lower the priority will be.
: Press it, then the priority value of the selected alarm will be reduced by 1. The
smaller the value is, the higher the priority will be.
Alarms with higher priority will be triggered first.
1 is the highest priority, and 8 is the lowest.
If two alarms A and B are triggered at the same time, and A’s priority is higher
than B’s, then A will record first. After A finishes the recording, if B is still being
triggered, B will then record. However, if B is no longer being triggered now, it
will not record.
If alarm B is triggered and at the process of recording, however, alarm A, whose
priority is higher than B, is triggered then, B will not stop recording.
11.8 Update
For single device
Step 1: Copy the folder to USB disk or SD card root directory and insert the USB disk
or SD card into DVR.
Step 2: Power off the DVR and reboot it, then it will upgrade automatically. Or in the
menu Menu -> System -> Update, touch OK to confirm to upgrade. Both methods can
start the upgrade process.
To Next Page
Loading...
Need help?
General
