About this document
This manual is intended for administrators and users of the AXIS
M3114-VE Network Camera, and is applicable to firmware 5.40 and
later. It includes instructions for using and managing the product on
your network. Previous experience of networking will be of use when
using this product. Some knowledge of UNIX or Linux-based systems
may also be beneficial, for developing shell scripts and applications.
Laterversionsofthisdocumentwill be posted to the Axis website,
as required. See also the product’s online help, available via the
web-based interface.
Liability
Every care has been taken in the preparation of this manual. Please
inform your local Axis office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and manuals without prior notice. Axis Communicat ions AB
makes no warranty of any kind with regard to the material contained
within this document, including, but not limited to, the im plied
warranties of merchantability and fitness for a particular purpo se. Axis
Communications AB shall not be liable nor responsible for incidental or
consequential damages in connection with the furnishing, performance
or use o f this material. This product is only to be used for its intended
purpose.
Intellectual Property Rights
Axis AB has int ellectual property rights relating to technology embodied
in the product described in this document. In particular, and without
limitation, these intellectual property rights ma y include on e or more
of th e patent s listed at http://www.axis .c o m/patent.htm and one or
more additional patents or pending pat e nt applications in the US and
other countries.
This product contains licens ed third-party software. See the menu item
“About” in the p roduct’s user interface for m ore information.
This product contains source code copyright Apple Computer,
Inc.,underthetermsofApplePublicSourceLicense2.0(see
http://www.opensource.ap ple.com/apsl). The source c ode is available
from http://developer.apple.com/darwin/projects/bonjou r/
Equipment Modifications
This equipment must be installed and used in strict acco rdance with the
instructions given in the user documentation. This equipment co ntains
no user-serviceable components. Una uthorized equipment changes or
modifications will invalidate all applica ble regulatory certifications
and approvals.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Internet Explorer, Linux , Microso
ft,
Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, Windows Vista and
WWW are registered trademarks of the respective holders. Java and
all Java-based trademarks and logos are trademarks or registe
red
trademarks of Oracle and/or its affiliates. UPnP
TM
is a certification
mark of the UPnP
TM
Implementers Corporation.
Support
Should you require any technical assistance, please contact your Axis
reseller. If your questions cannot be answered immediately, your
reseller will forward your queries throu
gh the appropriate channels to
ensure a rapid response. If you are connected to the Internet, you can:
• download user documentation and software updates
• find answers to resolved problems in the FAQ database. Search
by product, category, or phrase
• report problems to Axis support staff by logging in to your private
support area
• chat with Axis support staff (se lected countries only)
• visit Axis Support at www .axis.com/techsup/
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulfill applica ble
standards for:
• Radio frequency emiss
ion whe n installed according to the
instructions and used in its intended environment.
• Immunity to electrical and electromagnetic phenomena when
installed accor
ding to the instructions and used in its intended
environment.
USA
Depending on the characteristics of the electrical environment, using
shielded cables (STP) may be appropriate, in which case the following
is a pplicable: This equipment has been tested using shielded cables
(STP) and found to comply with the limits for a Cl ass B digital device,
pursuant to part 15 of the FCC Rules . The se limits are designed
to provide reasonab le protection against harmful interfe rence in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
Canada
This Class B digital apparatu s complies with C anadian ICES-003.
Europe
This digital equipment fulfills the requireme nts for RF emission
according to the Class B limit of EN 55022.
This product fulfills the requirements for immunity according to
EN 61000-6-1 residential, commercial and light-industry environments.
This product fulfills the requirements for immunity according to
EN 61000-6-2 industrial environments.
This product fulfills the requirements for immunity according to
EN 55024 office and commercial e nviron ments.
Australia/New Zealand
This digital equipme nt fulfills the requirements for RF emission
according to the C lass B limit of AS/NZS CISPR 22.
Korea
Japan
この装置は、クラスB 情報技術装置です。この装置は、家庭
環境で使用することを目 的としていますが、この装置がラジ
オやテレビジョン受信機に近接して使用されると、 受信障
害を引き起こすことがあります。 取扱説明書に従って正し
い取り扱いをして下さい。
To Next Page
Loading...
