AXIS M3114-VE Network Camera
PTZ (Pan Tilt Zoom)
3. Specify the pause length between runs.
4. Select an available preset position and click Apply.
6. Specify the View Time in seconds or minutes.
7. Specify the View order or select the Random view order check box option.
8. Click Save.
To modify or rem ove guard tours, go to PTZ>GuardTour, select the guard tour in the Guard Tour List and click Modify/Remove.
For more information see the online help
.
Note
The pause between guard tour runs must be set to at least 10 minutes.
Advanced
Controls
Panel Shortcut Command Buttons can be configured to provide direct access to commands issued via the VAPIX® Application
Programming Interface. The buttons will be displayed in the PTZ control panel, which is available in the Live View pag e through
the Ctrl panel button, see page 9 .
Note
Disabling PTZ controls will not affect preset pos itions . For example, if the tilt control is disabled, the product can still move to
preset positions that require a tilt movement.
21
To Next Page
Loading...
