Axis P3346 Installation Guide

AXIS P33/P33-V Network Camera Series Installation Guide Page 5
ENGLISH
AXIS P33/P33-V Network Camera Series
Installation Guide
This installation guide provides instructions for installing an AXIS P33/P33-V Network Camera
Series on your network. For all other aspects of using the product, please see the User’s Manual,
available on www.axis.com
Notes:
• Before you begin, make sure that the package contents, the required cables, tools,
and documentation are available. See Package contents below.
• This network camera is intended to operate with PoE; if not available use AXIS PoE Midspan 1 port (not
included).
Package contents
1. “Package contents” on page 5
2. “Hardware overview” on page 6
3. “Mount the camera” on page 7
4. “Assign an IP address” on page 9
5. “Set the password” on page 12
6. “Adjust the Lens” on page 15
7. “Complete the installation” on page 16
Item Models/variants/notes
Network camera AXIS P3346, AXIS P3346-V
AXIS P3367-V, AXIS P3384-V
Dome covers Clear transparent cover
Smoked transparent cover
Labels 2 adhesive serial no. labels
Mounting kit Resitorx screw driver, drill template, 2 screws and plugs,
terminal block connector
CD AXIS Network Video Product CD including product documentation,
installation tools and other software
Printed materials Installation Guide (this document)
Axis Warranty Document
AVHS Authentication key
Optional accessories Mounting bracket (region specific)
See www.axis.com for information on available accessories

Axis P3346 Specifications

General

Total megapixels	3 MP
Maximum resolution	2048 x 1536 pixels
Supported video modes	1080p
Video formats supported	H.264, M-JPEG, MPEG4
Supported graphics resolutions	2048 x 1536 (QXGA)
Pan range	0 - 360 °
White balance	Auto
Tilt angle range	0 - 160 °
Angle of rotation	340 °
Camera shutter speed	1/35500 - 1/6 s
Minimum illumination	0.08 lx
Sensor type	CMOS
Optical sensor size	1/3 \
Security algorithms	802.1x RADIUS, HTTPS
Video motion detection	Yes
Audio formats supported	AAC
Cabling technology	10/100Base-T(X)
Supported network protocols	IPv4/v6, HTTP, HTTPS, QoS L3, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
Dimensions (WxDxH)	96 x 148 x 101 mm
Compliance industry standards	IEEE 802.3u, IEEE 802.3af
Power source type	PoE
Certification	EN 55022 B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC 15 B B, ICES-003 B, VCCI B, C-tick AS/NZS CISPR 22, EN 60950-1
Processor model	ARTPEC-3
Placement supported	Indoor
Flash memory	128 MB
Compatible memory cards	SD, SDHC
Housing material	Polycarbonate (PC)
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	15 - 85 %

Weight and Dimensions

Weight	490 g