Axis P3346 Installation Guide

AXIS P33/P33-V Network Camera Series Installation Guide Page 9
ENGLISH
Assign an IP address
The network camera is designed for use on an Ethernet network and requires an IP address for
access. Most networks today have a DHCP server that automatically assigns IP addresses to
connected devices. If your network does not have a DHCP server, the network camera will use
192.168.0.90 as the default IP address.
AXIS IP Utility and AXIS Camera Management are the recommended methods for setting an IP
address in Windows. These free applications are available on the Axis Network Video Product CD
supplied with this product, or they can be downloaded from www.axis.com/techsup Depending on
the number of cameras you wish to install, use the method that suits you best.
Notes:
• If you are unable to set the IP address, check for any firewall blocking the operation.
• See page 17 for other available methods for setting or discovering the IP address of the network camera,
in relation to other operating systems.
Method Recommended for Operating system
AXIS IP Utility
See page 10
Single camera
Small installations
Windows
AXIS Camera Management
See page 11
Multiple cameras
Large installations
Installation on a different subnet
Windows 2000
Windows XP Pro
Windows 2003 Server
Windows Vista
Window 7

Axis P3346 Specifications

General

Total megapixels	3 MP
Maximum resolution	2048 x 1536 pixels
Supported video modes	1080p
Video formats supported	H.264, M-JPEG, MPEG4
Supported graphics resolutions	2048 x 1536 (QXGA)
Pan range	0 - 360 °
White balance	Auto
Tilt angle range	0 - 160 °
Angle of rotation	340 °
Camera shutter speed	1/35500 - 1/6 s
Minimum illumination	0.08 lx
Sensor type	CMOS
Optical sensor size	1/3 \
Security algorithms	802.1x RADIUS, HTTPS
Video motion detection	Yes
Audio formats supported	AAC
Cabling technology	10/100Base-T(X)
Supported network protocols	IPv4/v6, HTTP, HTTPS, QoS L3, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
Dimensions (WxDxH)	96 x 148 x 101 mm
Compliance industry standards	IEEE 802.3u, IEEE 802.3af
Power source type	PoE
Certification	EN 55022 B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC 15 B B, ICES-003 B, VCCI B, C-tick AS/NZS CISPR 22, EN 60950-1
Processor model	ARTPEC-3
Placement supported	Indoor
Flash memory	128 MB
Compatible memory cards	SD, SDHC
Housing material	Polycarbonate (PC)
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	15 - 85 %

Weight and Dimensions

Weight	490 g