EasyManua.ls Logo

Axxess ASWC-1 - LED Feedback

Axxess ASWC-1
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
B. Radio LED Feedback (indicated by Red LED on the ASWC-1)
1st LED flash is for Eclipse (Type 1)
2nd LED flash is for Kenwood
3rd LED flash is for Clarion (Type 1)
4th LED flash is for Sony and Dual
5th LED flash is for JVC
6th LED flash is for Pioneer and Jensen
7th LED flash is for Alpine*
8th LED flash is for Visteon
9th LED flash is for Valor
10th LED flash is for Clarion (Type 2)
11th LED flash is for Metra OE
12th LED flash is for Eclipse (Type 2)
13th LED flash is for LG
14th LED flash is for Parrot**
15th LED flash is for XITE
*Note (section B): If the ASWC-1 flashes 7 times and you do not have an
Alpine radio connected to it that means that the ASWC-1 did not see any
radio connected. Verify the 3.5mm connector is connected to the steering
wheel control input into the radio.
**Note (section B): The AX-SWC-PARROT is required (sold separately).
The radio must be updated to rev. 2.1.4 or higher from www.parrot.com
and ASWC-1 must be updated to the latest firmware from
www.axxessinterfaces.com.
23
ASWC-1 Troubleshooting
LED Feedback

Other manuals for Axxess ASWC-1

Related product manuals