AzureWave AW-GA800BT User Manual

2-
1
Chapter 2 Installation
2.1 System requirements
Before installing the AzureWave 802.11 b/g USB WLAN Module, driver and utilities, make sure
your system satisfy the following requirements
l ASUS motherboard with AzureWave 802.11 b/g USB WLAN Module specific slot
l Intel® Pentium™ 4
l Minimum 64MB system memory
l Windows® Operation System
Ad-Hoc and infrastructure mode: Windows® 2000, XP and Server 2003
Software AP and Wireless Bridge: Windows® XP and Server 2003
l Optical drive for driver and utilities installation
2.2
Hardware Installation
To complete the hardware installation of AzureWave 802.11 b/g USB WLAN Module, you only
need to install the moveable dipolar antenna at the rear of
motherboard.
Installing the antenna:
l Locate the wireless LAN antenna port on the motherboard
rear panel.
l Connect the antenna twist-on connector (female) to the
wireless LAN antenna port (male)
l Place the antenna at an elevated location to enhance your
wireless LAN valid coverage.

AzureWave AW-GA800BT Specifications

General

Brand	AzureWave
Model	AW-GA800BT
Category	Control Unit
Language	English