B.E.G. LUXOMAT BL2 - Schematic Wiring Diagrams; Standard Connection; Parallel Connection

BL2 93317
Operating Manual 11
5 Electrical connection
DANGER
Danger of death due to electrical shock!
Work on electrical equipment may only be carried out by certified electricians or by
instructed persons under the direction and supervision of a certified electrician in accord-
ance with the electrical engineering regulations.
➜ Disconnect supply before installing!
➜ This device is not to be used to isolate other equipment from the mains supply.
WARNING
Observe inrush currents!
Due to the high inrush currents of electronic ballasts and LED drivers, the maximum num-
ber of switchable luminaires is limited.
➜ Use an external contactor for a large number of loads.
9