BL2 93317
Operating Manual 3
1 About this document
1.1 Other applicable documents
Short operating manual MAN_9728_120717-1 (supplied with the device).
1.2 Used symbols and signal words
2 Safety
The motion detector BL2 was developed, manufactured and tested in accordance with the appli-
cable safety standards. It corresponds to the state of the art.
2.1 Intended use
The device is a motion detector for ceiling mounting (interior applications) having a circular detec-
tion area.
Symbol indicating possible dangers to persons
Symbol indicating possible property damage
Symbol for useful information and tips
NOTICE Signal word for possible property damage
CAUTION Signal word for possible minor injuries
WARNING Signal word for possible serious injuries
DANGER Signal word for possible fatal injuries
CAUTION
Observe intended use!
The protection of personnel and the device cannot be guaranteed if the device is oper-
ated in a manner not complying with its intended use.
➜ Only operate the device in accordance with its intended use.
➜ B.E.G. Brück Electronic GmbH is not liable for damages caused by improper use.
➜ Read these operating instructions before commissioning the device. Knowledge of the
operating instructions is an element of proper use.
NOTICE
Comply with conditions and regulations!
➜ Observe the locally applicable legal regulations and the rules of the employer's liability
insurance association.
To Next Page
Loading...
