Test Procedure
© b2 electronic GmbHDHV0086 Rev0642
Step Procedure (Set manual test parameters)
Basic Report
RS3�1�01: Report Details - Basic
Report Title
For naming “Report Title” see 7.3 Report
Naming Instructions on page 88
RS3�1�02: Report details - Basic
DUT
Set Device Under Test:
• Cable
• Motor
• Generator
• Transformer
• Switchgear
• Vacuum Bottle
• Other
RS3�1�03: Report Details - Basic
Voltage Rating
Set voltage rating:
• 0 - 50 kV
This is a characteristic of the DUT and
does NOT refer to the test voltage!
To Next Page
Loading...
