Reporting
© b2 electronic GmbH DHV0086 Rev06 87
7 Reporting
7�1 Report Type
The HVA can generate two report types: “Basic” or “Extended”. Reporting
can also be disabled. Ssee 4.3 Instrument Setup on page 25
Report Information Basic Extended Disabled
Report title a a
Device Under Test a a
Voltage rating a a
Insulation a a
Phase a a
Company name a
Region name a
Station name a
Line length a
Size of DUT a
Manufacturer name a
Work order a
Operator name a
7�2 Report Activation
Reporting can be activated or deactivated in “Instrument Settings”.
Ssee 4.3 Instrument Setup on page 25
If reporting is set to “Disabled”, no report will be produced.
To Next Page
Loading...
