WWW.BALTIMOREAIRCOIL.COM
8
Figure 7c. Lower Section Lift
W1
(MIN)
H
Safety
Slings
Spreader
Bar
Lifting Cable
Figure 7a. Plenum Module Lift
Plenum Module
Safety
Slings
W1
(MIN)
Spreader Bar
Lifting Cable
Safety
Slings
Coil Module
Spreader Bar
Lifting Cable
W1
(MIN)
Figure 8. Lower Section Sealing Detail
SpreaderBar
LiftingCable
Spreader
Bar
LiftingCable
Plenum Module
Coil Module
Safety
Slings
Safety
Slings
W1
(MIN)
W1
(MIN)
PerimeterFlange
Seals
PlenumStepSeal
NOTE: All single-cell and multi-cell
units must be rigged one section
at a time.
Dual Air Intake Four Piece Cell Assembly Instructions:
1. Removeanyaccessoriesshippedinthecoldwaterbasin.
2. Positionthelowersectionontheunitsupportsandboltinplace.
3. Wipemoistureanddirtfromtheperimeterangeandplenumstepasshownin
Figure 8.
4. Applyatbutylsealertape(BACpart#554000)tocriticalsealareasshownin
Figure 9.Applya2”x2”pieceofatbutylsealertapetothecornerriggingguidesas
showninFigure 10.Applyatbutylsealertapeacrosstheplenumstepasshownin
Figure 11.
5. Applyatbutylsealertapearoundtheentireperimeterofthelowersection.Align
thetapeontheperimeterangeasshowninFigure 12.SeeFigures 10and11for
criticalsealingareas.Allow1”overlaptapeattheselocations.
Figure 7b. Coil Module Lift