Page 33
• No cards in the card feeder.
Put cards back into the feeder - the
process starts again.
• Card loading error.
Check cards have been loaded
For any other problem contact your
BadgePass dealer.
• No ribbon in the printer.
• End of ribbon.
• The ribbon is not correctly fitted.
• The ribbon is torn.
• The ribbon is not recognized.
Check the condition of the
ribbon in the printer. If you have
a print job
• The printer is ready to receive data.
PRINTER READY
• The printer is receiving data.
PROCESSING
RIBBON CARDS
Document History
BadgePass NXT5000 USER GUIDE
To Next Page
Loading...
