BadgePass NXT5000 - Page 34

Page 34
PRINTER COVER OPEN MECHANICAL ERROR
• Card jammed in the printer.
• Mechanical component fault.
Open the cover and hold down the
pushbutton in order to eject the
jammed card. For more details, refer
to section 4-3b. If the problem
persists, contact your BadgePass
dealer for assistance.
• The printer cover is open.
Close the cover again. The
printer starts up.
ROUTINE CLEANING
(after 1,000 cards have been
inserted)
ADVANCED CLEANING
• The printer requires advanced cleaning.
See section 3 - Maintenance
• The printer must be cleaned.
See section 3 - Maintenance
CLEANING
(after 1,200 cards have been
inserted)
• The printer must be cleaned to
avoid the risk of the warranty being
voided.
See section 3 - Maintenance
Document History
BadgePass NXT5000 USER GUIDE