Volume bar empty. No attempt is made to heat
hot water specifically. This saves energy when
the freshwater is drained down.
Volume bar half full. Hot water is heated to
greater than 50°C. NB: If circulation pump
is set to Continuous, this option will not be
available.
Volume bar full. Central heating circulation
is disabled for 30 mins. Hot water is heated
to greater than 65°C. After 30 mins the
system reverts to Hot Water Normal. Adjust by
pressing plus or minus button.
The Alde boiler stores 8.4 litres of hot water as
standard. If the hot water cylinder is empty, the
air is heated but no damage can result.
If Day or Night Mode’s Hot Water
Ignore is active the hot water cannot
be adjusted. The plus and minus
buttons will be greyed out.
To Next Page
Loading...
