7-4 VS1MD AC Drive User Manual
d9 Software Version
Range: 1.0 to 99.9
Default: Read Only
Displays the Main Control Board software version.
nOn Current Fault Display
Range: See Chapter 9 - Troubleshooting for fault
code description
Default: Read Only
See Also: H1-H6
Displays the types of faults, frequency and operating status at the time of
the last fault.
Fault Types
Frequency
Current
Accel/
Decel
Information
Fault during Accel
Fault during Decel
Fault during constant run
Fault code history can be viewed in parameters H1 - H5. H6 is used to
clear the fault code history. For a complete description of fault codes,
refer to Chapter 9 - Troubleshooting.
To Next Page
Loading...
