BALDR B0201WST2H2 - Time Setting Procedure; Alarm Configuration; Alarm and Snooze Functions; Max and Min Records

1. Press and hold “AL/SET” button to enter into time setting; the setting data
will be flashing in 1Hz.
2. Press “MEM/▼” or “CH/▲” button to adjust data; press and hold “MEM/
▼” or “CH/▲” button will quickly change the data by 8 steps.
3. The setting order is: Year →Month →Day →Weekday Language →Time
zone →12/24H →Hour →Minute →C/F → Exit.
4. There are 7 languages selectable for weekday display: FR, NE, ES, DR, EN,
GE, IT (French, Dutch, Spanish, Denish, English, German, Italian)
5. If no operation for 20 seconds, it will automatically save and exit setting.
TIME SET
1. On normal time display mode, press “AL/SET” button to switch to alarm
display mode.
2. Press and hold “AL/SET” button to enter into alarm time setting mode.
3. Press “MEM/▼” or “CH/▲” button to adjust data; press and hold “MEM
/▼” or “CH/▲” button will quickly change the data by 8 steps.
4. The setting order is: Hour → Minute→ Exit.
5. On alarm display mode, press the “MEM/▼” button to turn on/off the alarm.
6. If no operation for 20 seconds, it will automatically save and exit setting.
ALARM SET
1. When alarm is ringing, press “SNOOZE/LIGHT” button to activate snooze
function. And the alarm will ring again in 5 minutes.
2. Press and hold “SNOOZE/LIGHT” button for more than 3 seconds will
stop the alarm; or press any other button to stop the alarm. And the
alarm will restart next day.
3. The ascending “Bibi” alarm sound will last for 2 minutes if no operation.
ALARM AND SNOOZE
1. Press “MEM/▼” to have maximum temperature and humidity, the value
will display 5 seconds.
2. Press “MEM/▼”second time to have the minimum temperature and hu-
midity, the value will display 5 seconds.
3. Press “MEM/▼”third time will return to standard mode.
MAX AND MIN RECORD