B&D Smart Pro SDO-9 - 11 Specifications

10
Smart Pro installation instructions
11. Specications
Technical Specications Controll-A-Door
®
Smart Pro
SDO-9
Rated voltage range: 230V - 240V
Rated frequency: 50Hz / 60Hz
Rated power input: 225W
Door opening:
Maximum Door Weight:
Door must be well balanced and able to be operated by
hand, as per warranty conditions and AS/NZS 4505:2012
300kg*
Minimum headroom 57mm
Rated Operating Time 4 mins
Rated Temp +5
o
C to +40
o
C
Short Term Peak force: 1400N
Door travel speed (mm/sec) 125mm
Rated load 450N
Nominal force 200N (20kg)
Receiver type Multi-frequency UHF
Receiver code storage capacity 64 X 4-button Transmitters
Transmitter battery CR2032 (3 Volts)
Courtesy light 2 x LED (Light Emitting Diodes)
Network connectivity Network ready
(Smart hub already installed)
* Gross door weight, including all ttings
Note: During the open and close cycles, intermittent operations may occur in areas which experience very strong
winds. The strong wind puts extra pressure on the door and tracks which may in turn intermittently trigger the safety
obstruction detection system.