B&D Smart Pro SDO-9 - 23 Appendix; A - Status Indication During Operating Mode

24
Smart Pro installation instructions
23. Appendix
A - Status Indication during Operating Mode.
LEDs Light Status Indicates
BLUE GREEN YELLOW RED PURPLE
DOOR OPEN AND
CLOSED LEDS
solid Open
rapid
ashing
Open with Autoclose timer running
ashing Opening / Obstructed on Open
solid Closed
ashing Closing / Obstructed on Close
ashing ashing Stopped
solid solid Partial Open
MODE LED
ashing Load Diagnostics mode
BATTERY LED
off Battery not used / not tted
solid Battery charged
ash 2
secs
in use (holding STOP for 10s will
shutdown)
ashing Battery charging, when connected
to power
rapid
ashing
Battery failed / fault
REMOTE CONTROL STATUS LED
ashing Remote lockout from vacation mode
rapid
ashing
Remote Control Activity
NETWORK LED
ashing Hot Spot Turning On
solid Hot Spot Active
1 ash then
pause
2 ashes
then pause
Connecting to Wi-Fi
Connected to Server
solid Connected to Cloud
ashing Software Updating
icker Status update / Command received
On Wi-Fi Disabled
ashing Requires conrmation from user
alternate alternate Rebooting