B&G LCD Plotter
Part 2 - Operating Information
HB-0847-02
2-10
2.8 Displaying Chart Details
Information may be switched on or off to greatly enhance the viewing of the
area currently being navigated. This is especially useful in ports and
harbours where there are numerous depth contours etc. Navigational aids
which may be switched on or off are as follows: depth contours, names,
navaids, and the land fill capability. To switch a Navaid on or off, observe the
following procedure:
1) Press the MENU key
2) Use the CURSOR key to highlight SETUP from the menu
3) Use the CURSOR up/down keys to select desired function
4) Use the CURSOR left/right keys to select ON or OFF from the menu
5) Press ENTER to accept
2.9 Displaying Navaid Information (Lights)
To display navaid information, move the CURSOR over the light symbol
(ensure NAVAIDS is switched to ON in the setup menu). A window will now
be displayed showing the position and characteristics of the light.
Description of light characteristics:
Abbreviations for Light Abbreviations for Colour
AL
Alternating
AM
Amber
F
Fixed
B
Black
FLL
Fixed and Flashing
BL
Blue
FL(..)
Group Flashing
G
Green
FL
Single Flashing
OR
Orange
IQ
Interrupted Quick
R
Red
OC
Single-Occulting
VL
Violet
OC(..)
Composite Group Occulting
W
White
Q
Continuous Group
Y
Yellow
Abbreviations for Period Abbreviations for Range
..S
xx seconds
..M
xx nautical miles
To Next Page
Loading...
