ZONE 1 (A)
Recalling/Saving Presets via the Menu System
You can also recall, save presets and operate your processor via the menu system from the remote or from the
front panel. If using the remote be sure it is in B&K mode and you are in the MAIN MENUS.
MAIN MENU
1 Zone 1 Operation
2 Zone 2 Operation
3 Zone 1 Favorite Presets
4 Zone 2 Favorite Presets
5 System Setup
6 Memory Backup/Restore
next item SEL select
MENU exit menu system
1 Zone 1 Operation
= 23(5$7,21
ZONE 1 OPERATION
Source DVD Record DVD
Video DVD Volume - 25.0
Mode Surround Center 0.0
Spkrs 7 Rear 0.0
Eq 0 Off Sub 0.0
character adjust
0..9 +10 recall SAVE preset
MENU cancel
= 6285&( '9'
↑ ↓
← →
return to main menu
∠ MENU
MENU4
adjust and or edit Zone 1
parameters as desired
(SOURCE)
(MODE)
and or
∧ (UP) or ∨ (DOWN) (select function)
VOLUME KNOB (adjust parameter)
source then B&K
VOLUME ∧ or VOLUME ∨
CENTER
or CENTER
REAR
or REAR
SUB
or SUB
EQ
3
activate ZONE 1 OPERATION
↵ (ENTER)
SEL or ENTER2
move to Zone 1 Operation
∧ (UP) or ∨ (DOWN)
(PAUSE) or
(STOP)
1
ActionFrom Front PanelFrom Remote
Recall preset using Zone 1 Operation
recall preset
↵ (ENTER)
ENTER5
select a preset for recall
(PRESET) step to desired presetnumber or +10+ number4
activate ZONE 1 OPERATION
↵ (ENTER)
SEL or ENTER3
move to Zone 1 Operation
∧ (UP) or ∨ (DOWN)
(PAUSE) or
(STOP)
2
return to main menu
∠ MENU
MENU1
ActionFrom Front PanelFrom Remote
56
p/n 12857 Rev. 0717A
To Next Page
Loading...
Need help?
General
