EasyManua.ls Logo

B&K Reference 30 - Advanced Features: Control Output Setup (1 & 2); Control Out 1 and 2 Setup

B&K Reference 30
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
activate CONTROL OUT SETTINGS
(ENTER)
SEL or ENTER2
move to Control Out
(UP) or (DOWN)
(PAUSE) or
(STOP)
1
ActionFrom Front PanelFrom Remote
Setup Control Out 1
Control out 1 is dedicated to Zone 1 (A) it can be programmed to be on or off for each source. For example you
may wish to use the control out to pull down a projection screen for your V1 and DVD sources but roll it up for
Tuner and CD. Control out 1 can also be set to HEADPHONE or RS-232. HEADPHONE mode is intended to
control external amplifiers to permit headphone listening without the need for manually turning off your external
amplifiers. Select the RS-232 option when Control out 1 is to be set using BKC-DIP.
&21752/ 287
CONTROL OUT 1 SETUP
1 TUNER Phones
2 V1 Phones
3 V2 Phones
4 TV Phones
5 DVD Phones
6 CD Phones
7 SAT Phones
8 Ta
p
e Phones
next item ad
j
ust
MENU control out setu
p
1 TUNER Phones
& 781(5 3+21(6
CONTROL OUT SETUP
1 Control Out 1
2 Control Out 2
3 Control Out 3
4 Control Out 4
next item SEL select
MENU advanced setup
1 Control Out 1
return to CONTROL OUT SETTINGS
MENU
MENU6
set control out 1 for other sourcesrepeat 3 - 4
repeat 3 - 45
select desired control operationVOLUME KNOB
(REW) or

(FF)
4
move to desired source
(UP) or (DOWN)
(PAUSE) or
(STOP)
3
activate CONTROL OUT 1 SETUP
(ENTER)
SEL or ENTER2
move to Control Out 1
(UP) or (DOWN)
(PAUSE) or
(STOP)
1
ActionFrom Front PanelFrom Remote
Control Out 2, 3, and 4 -
Control out 2, 3, and 4 can be used in either zone. For each source they can be
programmed to be on when that source is selected in Zone 1 (A), Zone 2 (B), or both zones. If the source is
selected in neither zone the control out will be off. Control outs 2, 3, and 4 can also be set to REMOTE. In
REMOTE mode your processor acts like a remote repeater - IR remote signals detected by your processor are
repeated on the control out. Select the RS-232 option when a Control out is to be set using BKC-DIP.
Setup Control Out 2
CONTROL OUT SETUP
1 Control Out 1
2 Control Out 2
3 Control Out 3
4 Control Out 4
next item SEL select
MENU advanced setup
2 Control Out 2
&21752/ 287
CONTROL OUT 2 SETUP
1 TUNER Zone B
2 V1 Zone B
3 V2 Zone B
4 TV Zone B
5 DVD Zone B
6 CD Zone B
7 SAT Zone B
8 Tape Zone B
next item ad
j
ust
MENU control out setup
1 TUNER Zone B
& 781(5 =21( %
69
p/n 12857 Rev. 0717A

Related product manuals