Save preset using Zone 1 Operation
exit menu system
∠ MENU
MENU8
return to main menu
∠ MENU
MENU7
save preset
↵ (ENTER)
ENTER6
rename preset if desired
∧ (UP) or ∨ (DOWN)
VOLUME KNOB
(PAUSE) or
(STOP)
(REW) or
(FF)
5
start the preset save process.
Note: the system will pick the next
available preset. You may pick a
different preset number if desired.
SAVE and ↵ (ENTER)
SAVE or ENTER
or select a different preset
number
4
adjust and or edit Zone 1
parameters as desired
(SOURCE)
(MODE)
and or
∧ (UP) or ∨ (DOWN) (select function)
VOLUME KNOB (adjust parameter)
source then B&K
VOLUME ∧ or VOLUME ∨
CENTER
or CENTER
REAR
or REAR
SUB
or SUB
EQ
3
activate ZONE 1 OPERATION
↵ (ENTER)
SEL or ENTER2
move to Zone 1 Operation
∧ (UP) or ∨ (DOWN)
(PAUSE) or
(STOP)
1
ActionFrom Front PanelFrom Remote
ZONE 2 (B)
As with Zone 1 (A) operation you may also recall, save presets and operate your processor’s Zone 2 (B) via the
menu system via the remote or from the front panel. If using the remote be sure it is in B&K mode and you are in
the MAIN MENUS.
MAIN MENU
1 Zone 1 Operation
2 Zone 2 Operation
3 Zone 1 Favorite Presets
4 Zone 2 Favorite Presets
5 System Setup
6 Memory Backup/Restore
next item SEL select
MENU exit menu system
2 Zone 2 Operation
= 23(5$7,21
ZONE 2 OPERATION
Power Off
Source DVD Record DVD
Video DVD Volume - 25.0
next item adjust
0..9 +10 recall SAVE preset
MENU cancel
= 6285&( 2))
↑ ↓
← →
return to main menu
∠ MENU
MENU4
adjust and or edit Zone 2
parameters as desired
(SOURCE)
and or
∧ (UP) or ∨ (DOWN) (select function)
VOLUME KNOB (adjust parameter)
source then B&K
VOLUME ∧ or VOLUME ∨
3
activate ZONE 2 OPERATION
↵ (ENTER)
SEL or ENTER2
move to Zone 2 Operation
∧ (UP) or ∨ (DOWN)
(PAUSE) or
(STOP)
1
ActionFrom Front PanelFrom Remote
57
p/n 12857 Rev. 0717A
To Next Page
Loading...
