A/V SYSTEM CONTROLLER SPECIFICATIONS
5 years processor
1 year remote
Warranty:
See Limited Warranty
A/D & D/A, DSP & digital
receiver, IEEE1394
Upgradability:
10 poundsWeight:
17"(w)x10"(d)x3.50"(h)Dimensions:
Line -.5 Amp/250 Volt Replacement fuses:Motorola 24 Bit 120 MIPSDolby Digital/DTS DSP:
30 watts maxPower consumption:24 Bit 32/44.1/48/96kHzD/A Conversion
120/220/240 VACLine voltage:24 Bit 48/96kHzA/D Conversion
MiscellaneousProcessor Specifications
300 OhmsAntenna Input Impedance:75 OhmsAntenna Input Impedance:
70 dB, A WeightedSignal to Noise Ratio:
30 dBSelectivity:65 dBAlternate Channel Selectivity:
28 dBfSensitivity:15 / 35 dBfMono/Stereo Sensitivity:
12 dBfIHF (Usable) Sensitivity:
2 dBCapture Ratio:
28 dBfSensitivity:20 Hz - 15 kHz, +1/ -3 dBFrequency Response
Less than 0.3%Total Harmonic Distortion:Less than 0.25%Total Harmonic Distortion:
520 - 1670 kHz Frequency Range:87.5 - 107.9 MHzFrequency Range:
AM sectionTuner SpecificationsFM SectionTuner Specifications
6, 12 or 24 dB/OctLow Pass Crossover Slope
6 or 12 dB/OctHigh Pass Crossover Slope
Adjustable 20-200 HzHigh/Low Pass Crossover Fc
1Component Video Outputs
1/1 (Zone 1), 0/1 (Zone 2)Digital Outputs coax/optical
2Component Video Inputs
6/5Digital Inputs coax/optical
5.1 formatMulti Channel Input
5SVHS Video Outputs
4Audio Analog Outputs
7SVHS Video Inputs
7Audio Analog Inputs
5Composite Video Outputs
8Surround Outputs
7Composite Video Inputs
46 mVNoise Test Reference Level:
75 OhmsOutput Impedance:
221 OhmsOutput Impedance:
75 OhmsInput Impedance:
50 k OhmsInput Impedance:
98 dB CCIR 2 k WeightedSignal to Noise Ratio:
2 V P-PMaximum Output Level:
3 V rmsMaximum Output Level:
2 V P-PMaximum Input Level:
2 V in, 1.5 V reference outInput Sensitivity:
20 Hz - 10 MHz ±3dB
Frequency Response:
5 Hz - 20 kHz,
+
0/
−
0.5dB
Frequency Response:
Video Specifications
Audio Specifications
Specifications subject to change without notice
77
p/n 12857 Rev. 0717A
To Next Page
Loading...
