Banner DF-G1-NS-2M - Program Mode

Program Mode
Program (PRG) mode allows the
following settings to be
programmed in the DF-G1:
Factory Default Settings:
Setting Factory
Default
Threshold 2026
TEACH
Selection
Two-Point
TEACH
Response
Speed
Standard -
500 µs
Offset Percent 10%
Auto
Thresholds
OFF
OFF Delay 0 (Disabled)
OFF One-Shot 0 (Disabled)
ON Delay 0 (Disabled)
ON One-Shot 0 (Disabled)
Display
Readout
Numeric, ECO
disabled,
Normal
Orientation
Gain Selection Auto Gain
DF-G1 Expert
™
Dual Display Fiber Amplifier
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com