Banner DF-G1-NS-2M Install Sheet

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com
Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineering.com
Overview
Figure 1. DF-G1 Model Features
1 Output LED
2 LO/DO Switch
3 RUN/PRG/ADJ Mode Switch
4 Lever Action Fiber Clamp
5 Red Signal Level
6 Green Threshold
7 +/SET/- Rocker Button
Models
Model Outputs Connector*
DF-G1-NS-2M Single NPN
2 m (6.5') cable, 4-wire
DF-G1-PS-2M Single PNP
DF-G1-NS-Q3 Single NPN
150 mm (6") PVC pigtail, M8 Pico QD
connector, 4-pin
DF-G1-PS-Q3 Single PNP
DF-G1-NS-Q7 Single NPN
Integral M8 Pico QD connector, 4-pin
DF-G1-PS-Q7 Single PNP
* Cordset Options: A model with a QD connector requires a
mating cordset. For 9 m cable, change the suffix 2M to 9M in
the 2 m model number (example, DF-G1-NS-9M). For M12
Euro QD pigtail change the suffix 2M to Q5 in the 2 m model
number (example, DF-G1-NS-Q5).
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury or death. This
product does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor
failure or malfunction can cause either an energized or de-energized sensor output condition.
Hookups
NPN Models
PNP Models Key
2
3
4
1
1 = Brown
2 = White
3 = Blue
4 = Black
For cable options, see http://www.bannerengineering.com
DF-G1 - Expert Fiber Amplifier Install Sheet
P/N 161275 Rev. A 1/6/2012
0 161275 2

Banner DF-G1-NS-2M Specifications

Power

supply voltage	10 to 30 V dc
power consumption (standard display mode)	960 mW
current consumption (standard display mode)	< 40 mA at 24 V dc
power consumption (ECO display mode)	720 mW
current consumption (ECO display mode)	< 30 mA at 24 V dc

Output

output configuration	1 current sinking (NPN) or 1 current sourcing (PNP) output
output rating	100 mA max. load
off-state leakage current (NPN/PNP models)	< 5 μA at 30 V dc
on-state saturation voltage (NPN)	< 1.5 V

Performance

output response time (high speed)	200 µs
output response time (standard)	500 µs
repeatability (high speed)	66 µs
repeatability (standard/long range/extra long range)	100 µs

Operating Environment

operating temperature	−10 °C to +55 °C
storage temperature	−20 °C to +85 °C
humidity	90% at +60 °C maximum relative humidity (non-condensing)