6.5 Software Interface
In addition to being able to display a graphic rendering of the monitored area, the software provides configuration and
management tools, including file title header, drop-down menus, function-specific worksheets which contain entries relevant
to specific portions of the configuration.
Figure 57. Banner SX Scanner software
Menu Bar and Toolbar—Contains the Banner SX Scanner software
main features.
Task Selection—Presents a list of the task that can be performed from Banner SX Scanner software. These selections are
also available in the File and Scanner menus.
Status Bar—Located at the bottom of the screen, the status bar displays specific information about connected devices (once
discovered). It displays information on the current network status, the connected device status, the connector, and the
application type.
Help Online—Includes all the information and parameters to create a proper configuration. For the next configuration steps,
the help online is available only by clicking on the dedicated button.
6.5.1 Main Menu
The following menu options are available.
File
New Configuration—Creates a new device configuration from scratch.
Open Configuration from PC—Opens a previously saved Configuration file.
Read from PC - Report—Shows a Safety System Configuration Report saved on the PC.
Save—Saves the current configuration or report to PC.
Exit—Exits the configuration software user interface.
SX Safety Laser Scanner
www.bannerengineering.com - Tel: + 1 888 373 6767 77
To Next Page
Loading...
